Serious Problem

The good news is: She made it to Switzerland, driving non stop 188 Km,

 and up to 1200 m height NN (3.937 feet NAP).

But in front of the Hotel I had to drive backwards....and then this happened.(

I am still investigating what really happened. Both steering knuckles bent completely.

First the right and than, because of 600m depth in front of me I had to drive backwards again, and killed the left side.

I tormented her into the garage and hope to fix it before the next job...?!

Seating In Carbon Brushes Day 13

The End

46.400.000 revolutions and 312 hours runtime

But this seating was a major exception.

By accident I got the only set of H60 brushes on earth that was not angled right.

Mazel tov

Next H60 seating is running in a WarP11 and looks much much better from the beginning.

Seating In Carbon Brushes Day 10

35 mega revolutions at 242h

Brush Seating Service

WarP 9™ And WarP 11™ Motors In Stock

WarP 9 Series DC Motor

Double ended shaft - advanced timing, 1.125" DE Keyed Shaft* CE Keyed Shaft*, lift-eye bolt hole, thermal switch inkl. a Keyway and a Lift Eye Hook and National T300 or the Hellwig H49 RedTop split brushes. On request with brush seating service.

WarP 11 Series DC Motor

Double ended shaft - advanced timing, 1.125" DE Keyed Shaft* CE Keyed Shaft*, lift-eye bolt hole, thermal switch inkl. a Keyway and a Lift Eye Hook and the Hellwig H60 RedTop split brushes. On request with brush seating service.

As an authorized international Netgain dealer this WarP's are for sale.

Inquiries at: netgain@ccp-film.de

Seating In Carbon Brushes Day 9

32 mega revolutions / 222h

Spring force is at about 24 Nm.

Seating In Carbon Brushes Day 8

H60 brushes 60% seated after 27 mega revolutions.

EVDrive 18/2013 Seating In Carbon Brushes Part II

Seating In Carbon Brushes Day 7

This is the result after 24.400.000 revolutions or seven days runtime.

Helwig Carbon H60 brushes in a WarP 9

EVDrive 17/2013 Seating In Carbon Brushes

H49 Brushes

This are my (used) H49 Brushes from a WarP 9.

About four days runtime on the bench with no load and 1400 Km driving

with max. 420 amps at 142 volts.

Seating In Carbon Brushes Day 1-5

I am seating in H60 carbon brushes for more than five days now.

Running day and night a WarP 9 at 12V.

They are more or less half done after 125 hours.

After 125 hours runtime.

After 93 hours runtime.

After 73 hours runtime.

After 18 hours runtime.

May The 4th Be With You

Charge Force

 Two more Brusa chargers.

The tower of power.

The software setup takes only one minute.